Keptn v1 reached EOL December 22, 2023. For more information see https://bit.ly/keptn
This documentation is for an older Keptn release. Please consider the newest one when working with the latest Keptn.

Working and Integrating with Quality Gates

In order to work with and integrate quality gates, two actions are needed:

  1. Triggering a quality gate evaluation for a service in a specific project/stage and for a certain timeframe
  2. Fetching the evaluation result of a quality gate

This section explains how to use the Keptn CLI and the Keptn API for those two actions.

Using the Keptn CLI to work with quality gates

  • To work with the Keptn CLI, make sure your Keptn CLI is authenticated against your Keptn installation.

  • To verify the CLI connection to your Keptn, execute keptn status.

Trigger a quality gate evaluation

To trigger a quality gate evaluation for a service in the stage of a specific project, the Keptn CLI provides two commands:

  • The keptn trigger evaluation command allows specifying the timeframe of the evaluation using the --start, --end, or timeframe flags.

  • To trigger a quality gate evaluation with a timeframe of 5 minutes starting at 2020-12-31T10:00:00, use the following example:

keptn trigger evaluation --project=easyBooking --stage=quality_assurance --service=booking --start=2020-12-31T11:59:59 --timeframe=5m
  • This command returns a unique ID (keptn-context) that is required to retrieve the evaluation result.
  • First, specify a valid Keptn CloudEvent of type sh.keptn.event..evaluation.triggered and store it as JSON file, e.g., trigger_quality_gate.json. Choose one of the following three options to specify the event:

    • Option 1 - Define start and end time to evaluate:

      {
          "source": "keptn-cli",
          "specversion": "1.0",
          "type": "sh.keptn.event.quality_assurance.evaluation.triggered",
          "contenttype": "application/json",
          "data": {
            "evaluation": {
              "start": "2020-09-01T08:31:06Z",
              "end": "2020-09-01T08:36:06Z"
            },
            "labels": {
              "buildId": "build-17",
              "owner": "JohnDoe",
              "testNo": "47-11"
            },
            "project": "easyBooking",
            "service": "booking",
            "stage": "quality_assurance"
          }
      }
      
    • Option 2 - Define time frame to evaluate

      {
          "source": "keptn-cli",
          "specversion": "1.0",
          "type": "sh.keptn.event.quality_assurance.evaluation.triggered",
          "contenttype": "application/json",
          "data": {
            "evaluation": {
              "timeframe": "5m"
            },
            "labels": {
              "buildId": "build-17",
              "owner": "JohnDoe",
              "testNo": "47-11"
            },
            "project": "easyBooking",
            "service": "booking",
            "stage": "quality_assurance"
          }
      }
      
    • Option 3 - Define start and end time of previous test

      {
          "source": "keptn-cli",
          "specversion": "1.0",
          "type": "sh.keptn.event.quality_assurance.evaluation.triggered",
          "contenttype": "application/json",
          "data": {
            "test": {
              "start": "2020-09-01T08:31:06Z",
              "end": "2020-09-01T08:36:06Z"
            },
            "labels": {
              "buildId": "build-17",
              "owner": "JohnDoe",
              "testNo": "47-11"
            },
            "project": "easyBooking",
            "service": "booking",
            "stage": "quality_assurance"
          }
      }
      
  • Trigger a quality gate evaluation by sending the CloudEvent to Keptn using the keptn send event command:

keptn send event --file=trigger_quality_gate.json 
  • This command returns a unique ID (keptn-context) that is required to retrieve the evaluation result.

Fetch the evaluation result of a quality gate

  • To fetch a quality gate evaluation result, the Keptn CLI provides the keptn get event sh.keptn.event.evaluation.finished command. This command requires the ID (--keptn-context) returned by the trigger evaluation or send event command, as well as the name of the project (--project).
keptn get event sh.keptn.event.evaluation.finished --keptn-context=1234-5678-90ab-cdef --project=easyBooking

Note: The evaluation of the quality gate may take some time, especially because the metrics first have to be available in your monitoring solution and need to be queried by the SLI-provider. Consequently, the result is not immediately available.

Using the Keptn API to work with quality gates

  • To work with the Keptn API, get the API token from the Keptn Bridge and follow the Keptn API link to the Swagger-UI.

  • If you want to interact with the Keptn API via cURL, you also need the Keptn API URL and API token

Trigger a quality gate evaluation

To trigger a quality gate evaluation for a service in the stage of a specific project, the Keptn API provides two endpoints:

  • This endpoint requires the path parameters projectName, stageName, and serviceName: /api/v1/project/{projectName}/stage/{stageName}/service/{serviceName}/evaluation

  • The required payload allows you to set the start, end, and timeframe (choose either the end or timeframe parameter):

{
    "start": "2020-09-28T07:00:00",     // required
    "end": "2020-09-28T07:05:00",       // cannot be used in combination with 'timeframe'
    "timeframe": "5m",                  // cannot be used in combination with 'to'
    "labels": {
      "buildId": "build-17",
      "owner": "JohnDoe",
      "testNo": "47-11"
    }
}
  • Trigger a quality gate evaluation with a POST request:
curl -X POST "${KEPTN_ENDPOINT}/v1/project/easyBooking/stage/quality_assurance/service/booking/evaluation" \
-H "accept: application/json; charset=utf-8" \
-H "x-token: ${KEPTN_API_TOKEN}" \
-H "Content-Type: application/json; charset=utf-8" \
-d "{ \"start\": \"2020-09-28T07:00:00\", \"timeframe\": \"5m\", \"labels\":{\"buildId\":\"build-17\",\"owner\":\"JohnDoe\",\"testNo\":\"47-11\"}}"
  • The endpoint returns a unique ID (keptn-context) that is required to retrieve the evaluation result. (Note: The response also contains a token that is required to open a WebSocket communication. This token is not needed now.)
  • Specify a valid Keptn CloudEvent of type sh.keptn.event.[stage].evaluation.triggered and store it as JSON file, e.g., trigger_quality_gate.json. Choose one of the following three options to specify the event:

    • Option 1 - Define start and end time to evaluate:

      {
          "source": "keptn-cli",
          "specversion": "1.0",
          "type": "sh.keptn.event.quality_assurance.evaluation.triggered",
          "contenttype": "application/json",
          "data": {
            "evaluation": {
              "start": "2020-09-01T08:31:06Z",
              "end": "2020-09-01T08:36:06Z"
            },
            "labels": {
              "buildId": "build-17",
              "owner": "JohnDoe",
              "testNo": "47-11"
            },
            "project": "easyBooking",
            "service": "booking",
            "stage": "quality_assurance"
          }
      }
      
    • Option 2 - Define time frame to evaluate

      {
          "source": "keptn-cli",
          "specversion": "1.0",
          "type": "sh.keptn.event.quality_assurance.evaluation.triggered",
          "contenttype": "application/json",
          "data": {
            "evaluation": {
              "timeframe": "5m"
            },
            "labels": {
              "buildId": "build-17",
              "owner": "JohnDoe",
              "testNo": "47-11"
            },
            "project": "easyBooking",
            "service": "booking",
            "stage": "quality_assurance"
          }
      }
      
    • Option 3 - Define start and end time of previous test

      {
          "source": "keptn-cli",
          "specversion": "1.0",
          "type": "sh.keptn.event.quality_assurance.evaluation.triggered",
          "contenttype": "application/json",
          "data": {
            "test": {
              "start": "2020-09-01T08:31:06Z",
              "end": "2020-09-01T08:36:06Z"
            },
            "labels": {
              "buildId": "build-17",
              "owner": "JohnDoe",
              "testNo": "47-11"
            },
            "project": "easyBooking",
            "service": "booking",
            "stage": "quality_assurance"
          }
      }
      
  • Trigger a quality gate evaluation with a POST request on /event:

curl -X POST "${KEPTN_ENDPOINT}/v1/event" \
-H "accept: application/json; charset=utf-8" \
-H "x-token: ${KEPTN_API_TOKEN}" \
-H "Content-Type: application/json; charset=utf-8" \
-d @./trigger_quality_gate.json
  • The endpoint returns a unique ID (keptn-context) that is required to retrieve the evaluation result. (Note: The response also contains a token that is required to open a WebSocket communication. This token is not needed now.)

Fetch the evaluation result of a quality gate

  • To fetch a quality gate evaluation result, the Keptn CLI provides the /event endpoint. This endpoint requires the query parameters keptn-context and type; latter is always sh.keptn.event.evaluation.finished.
curl -X GET "${KEPTN_ENDPOINT}/api/mongodb-datastore/event?keptnContext={keptnContext}&type=sh.keptn.event.evaluation.finished" \
-H "accept: application/json; charset=utf-8" \
-H "x-token: ${KEPTN_API_TOKEN}"

Note: The evaluation of the quality gate may take some time, especially because the metrics first have to be available in your monitoring solution and need to be queried by the SLI-provider. Consequently, the result is not immediately available.

Integrate into an existing pipeline

To integrate quality gates into an existing pipeline, it is recommended to use the API-based approach outlined above. As stated there, the evaluation result is not immediately available. Hence, build your integration using a polling mechanism that polls the evaluation result every 10 seconds and terminates after, e.g., 10 retries.